See Video in Photo Gallery. (It will say not available, but you can click "Watch on YouTube" and it will play)
OR CLICK HERE TO WATCH VIDEO
MORRIS MULE TRAIL GRADE TRAILER SPECS & INFO
Hand made in Alabama, USA.
Morris stopped making trailers in 2020.
* Axle: Torsion bar
* Tires: Goodyear Wrangler 235/75/15
* Wheel Bearings have new grease
* Weight: 685 pounds
* Length: 11 feet
* Width: 64-3/4 inches
* Height without racks: 42-3/4 inches
* Overall height with low rack: 53-1/4 inches
* Overall height with high rack (without tent): 74-3/4 inches
* Overall height with closed Smittybilt Overlander tent: 81"
* Inside cargo area width: 38-1/2 inches
* Inside cargo area length: 59 inches
* Inside cargo area height: 18 inches
* Coupler height: 22-1/4 inches
* Frame clearance: 20-1/2 inches
* Axle clearance: 16-3/8 inches
* Table height: 40-1/2 inches
* Tail gate height (open): 23-3/4 inches
RACK DIMENSIONS - MORRIS MULE TRAILER
* Crossbar height on low rack: 48.5"
* Crossbar height on high rack: 70"
* Rack width: 50"
* Rack bars center to center: 62"
* High rack weight capacity during travel: 200 pounds
* High rack weight capacity when parked: 800 pounds
* Low rack weight capacity during travel: 200 pounds
* Low rack weight capacity when parked: 800 pounds
ITEMS MORRIS MULE TRAILER ALSO COMES WITH
* Spare tire carrier with full-size spare tire
* Set of 3 locking lug nuts, one for each tire including spare; lug nut
key included
* Two, rear trailer stabilizer legs
* Rear receiver
* High rack with Smittybilt roof top tent
* Low racks are included (in the trailer)
* Open lid table support chains (inside a blue bag in the trailer bed)
* Two 5-gallon jerry cans inside locking brackets that are mounted on
the trailer tongue, with small padlocks and keys
* Poly trailer tongue cargo box, 19" x 36" x 17.5", hinged latch will
accept a padlock, black color
* Four X-Bull recovery boards (recovery traction tracks), orange color
* 26-inch Estwing camper's axe with blade cover
* 39-inch shovel
* Four wheel chocks
MORE MORRIS MULE TRAILER INFO
CARGO BED: The bed is supported and protected by a tubular frame/chassis
that incorporates over 65 feet of 2" x 2" steel square tubing of
thicknesses ranging from the 1/4" wall tongue to the 14 Gauge uprights.
BED LIDS: The all-aluminum Bed Lids are formed with a center “gutter”
that, combined with foam seals front and rear, provides a weather seal
(not waterproof).
TAILGATE: The tailgate is an all aluminum design with 1/8 inch thick
aluminum skins supported by a tubular internal frame. It is secured
with aluminum and stainless steel latches at the top and 4 inch
heavy-duty steel hinges at the bottom. It also features a lighted tag
holder. When open, the tailgate is supported by removable chains. It is
an old fashioned set-up but is simple, durable and will last just about
forever. The chains are run through clear plastic tubing to decrease
noise and protect the bed's paint.
STABILIZER LEGS: Rear stabilizer legs support the rear of the trailer
when unhooked from the vehicle to prevent tipping and allow tire changes
without the need of a jack. Legs can be pinned in the "up" position for
travel or can easily be removed.
LIGHTS: Rear lights are LEDs protected in enclosed steel boxes and
wiring is protected by welded steel light tubes. Side Marker lights are
also LED.
TIE-DOWNS: Eighteen steel loop tie-downs are welded from front to rear
of each Morris Mule providing secure tie-down points all over the
trailer. There are five steel loop tie-downs on each side, three in the
rear and five in the front.
RACK SYSTEM: The high rack system allows canoes, kayaks, and roof top
tents to be carried high where the top-doors can still be opened with
the load on the racks. By changing to the short uprights and removing
the aluminum stabilizer bars the rack can be setup in the low mode,
allowing cargo to be loaded just above the trailer. In this mode the
load must be removed to open the Bed Lids.
SMITTYBILT OVERLANDER TENT (1st generation, model 2783)
* Folding, 2 to 3-person tent with rainfly, and door and window awnings
* Folded size: 60" L x 54" W x 14" H
* Weight: 145 lbs
* Load capacity: 661 lbs
* Tent material: Polyester with 600D heavy-duty waterproof rainfly;
rainfly is removeable
* 2 zippered doors with zippered screens
* 2 zippered side windows with zippered screens
* 2 top zippered windows with zippered screens
* Aluminum tent frame poles
* Aluminum telescopic ladder
* Interior LED strip lighting with USB connector (no power supply included)
* 2" thick foam mattress with zippered, removeable cover; dimensions are
92" x 55"
* Thick PVC travel cover (The tow original straps that go over the cover and around the folded tent for travel have been replaced with two
lashing straps.)
* Tent Annex (1st generation) in its carry bag is included (inside the trailer bed)
Day Two Auction Closes Tuesday, October 27th @ 6pm. Your invoice for this auction will be delayed, and emailed to you on Thursday morning, so that we can gather the items for each buyer prior to pickup day(s).
Pickup Dates/Times: Thursday October 29th @ 10a-6p OR Friday October 30th @ 10a-6p OR Saturday October 31st @ 10-1p
Invoices will be sent Thursday Morning with Pickup Location and contact information. There is limited driveway space and parking at this location, so your cooperation is necessary to avoid pickup frustrations. IF you see someone in the driveway, please park on the side of the street until we can clear the driveway. There is only room for one vehicle to enter and exit without a traffic jam.
