AKM Spotless DI Water System for RV/Vehicle

In Packaging?: Yes

Damaged?: Unknown


Spotless Car Wash: Usually after washing the car, you may notice spots on your vehicle. These spots are caused by the precipitation of mineral ions in the water. The AKM Deionized Water Car Wash System is designed to remove mineral ions from water, producing pure, deionized water. By washing your vehicle with deionized water, you can achieve a spotless finish without the need for manual drying. AKM portable deionized water system include 9"*20" FRP Tank (with polyester cover), 9.5 liters of mixed bed resin pre-filled(can be perfectly filled to 10 liters after adding water; replacement resin packs are available for purchase, ASIN:B0D9GQZ1DZ), 3/4" garden hose quick connector *2, 3/4" double female connection*1, PTFE sealing tape *1, black handle*1, TDS Meter Pen *1 for testing water's ppm value. Bypass Function for Easy Switching: The included valve features a built-in bypass function. No complicated steps just shift the handle to switch between bypass and filtration modes. Use the bypass mode during most of the car wash, then switch to filtration for the final rinse to conserve pure water and extend the resin's lifespan. Our system is not a single-use product. When the resin inside the tank is exhausted, you can simply refill it using AKM 10L mixed di resin. Just pour out the used resin, refill the tank, and reconnect the system it's ready to use again. Unlike standard plastic filter housings, our durable tank is built for long-term use, so typically only the resin needs to be replaced. How to Use: Our car wash system comes pre-filled with 9.5 liters of mixed bed resin. Simply connect it to your garden hose, and it's ready to use. The system is reusable just replace the mixed bed resin when needed. The included TDS meter allows you to test water ppm value at any time.